Antenna Module Coil Replacement

REMOVAL PROCEDURE
1. Remove the right sail panel trim.
2. Disconnect the body harness from the module.
3. Remove the bolt (2).
4. Disengage the tab on the module (1) from the slot in the sail panel.

INSTALLATION PROCEDURE
1. Engage the module tab in the slot.
2. Align the module hole for the bolt (2). Rotate downward the module (1).

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the bolt (2) for the antenna ground coil module.

Tighten
Tighten the bolt to 7.5 N.m (66 lb in).

4. Connect the body harness.
5. Install the sail panel trim.