Arming the System

The CTD system may also be armed when the windows are open.

Use the following procedure in order to arm the system:
1. Close all of the windows.
2. Place the shift lever in PARK.
3. Turn the ignition cylinder to the LOCK position.
4. Remove the key.
5. Open any door.
6. Lock the doors using one of the following components on the key fob:
^ The power door lock switch.
^ The door lock button.
7. Close all of the doors. The system is now armed.

If a door unlock request is received by the RFA module during the above arming sequence, the RFA module enters the disarmed mode. This will turn the SECURITY indicator OFF. In order to arm the system at this point, repeat the arming sequence.