Cellular Telephone Operation (Keypad Buttons)

Clear Key (CLR)
Press CLR to clear the entered number in the event of an error. This does not affect the stored numbers in memory.




Send (SND)
Press SND to initiate a call to the entered telephone number or to answer an incoming call.

End
Press END to terminate a call. This will also end the memory stroll mode.

Power Key (PWR)
Press PWR until you hear a tone to turn the phone ON. Press PWR until a tone is heard again to turn the phone OFF.

Store Key (STO)
Press STO and the location number (01-99) to store telephone numbers into any of the 100 memory locations. It can also be used to confirm personalized locations.

Recall Key (RCL)
Press RCL and the location number (1 - 99) to recall and display telephone numbers stored in the memory.
Numeric Pad (0 - 9,*,#)
Press 0 - 9,*,# to enter the telephone numbers. Enter numbers prior to initiating a call.

Function Key (FCN):
Press FCN to activate the following features of the mobile telephone:
^ Volume
^ In Service Use
^ Current Time Usage
^ Telephone Personalization

Voice Recognition
Press VR to allow entry into the voice recognition mode.

M1
Press M1 for one touch dialing. A number can be stored in this location and dialed directly.

Volume Control
The Volume Control adjusts audio from the following phone components:
^ The Keypad
^ The Speaker
^ The Earpiece
^ Volume Control is also used to scroll through the memory and feature menu.