Unlocking the Radio After A Power Loss

If you remove the battery power, LOC will appear on the display when you reapply the power. Enter the security code in order to unlock the system.
1. Refer to Enabling Theftlock(R). Enabling Theftlock(R)
2. Press the AM/FM after you are sure that the code is correct.
3. SEC should now appear on the display. The system is secure. You may now use the system.
4. After an initial 8 failed tries to unlock, the unit is in a second level LOCK condition and becomes inoperative for an hour. Any further code inputs during this hour cause the display to indicate INOP for 15 seconds before returning to LOC. The battery and ignition voltages must be present for an hour before the unit resets to the LOC condition. The unit then times out for an hour after every successive 3 incorrect entries.