Instrument Panel (IP) - End Bracket Replacement - Left

REMOVAL PROCEDURE
1. Remove the IP assembly.
2. Remove the fasteners (2) from the left IP end bracket (1) to the A-pillar.
3. Remove the left IP end bracket (1).

INSTALLATION PROCEDURE
1. Install the left IP end bracket (1) to the A-pillar.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners (2) to the left IP end bracket.

Tighten
Tighten the bracket fasteners to 55 N.m (41 lb ft).

3. Install the IP assembly.