Front Vertical

REMOVAL PROCEDURE
1. Remove the front seat.
2. Place the seat on a clean protected surface.
3. Remove the seat cushion and the cover if necessary.
4. Remove the memory seat module.
5. Disconnect the electrical connector.
6. Remove the retaining washers from the pivot pins at each end of the motor assembly.
7. Remove the pivot pins.
8. Remove the front vertical adjuster motor (1).

INSTALLATION PROCEDURE
1. Install the front vertical adjuster motor (1).
2. Install the pivot pins.
3. Install the retaining washers.
4. Connect the electrical connector.
5. Install the memory seat module.
6. Install the seat cushion and the cover if necessary.
7. Install the front seat.