HVAC System - Automatic

REMOVAL PROCEDURE

1. Remove the right sound insulator.
2. Disconnect the electrical connector.
3. Remove the [1][2]blower control module retaining screws.
4. Remove the [1][2]blower control module (1).

INSTALLATION PROCEDURE

1. Install the [1][2]blower control module (1).

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the retaining screws.

Tighten
Tighten the bolt to 2 N.m (23 lb in).

3. Connect the electrical connector.
4. Install the right sound insulator.