Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 1999 >> Park Avenue V6-3.8L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Removal and Replacement >> On-Vehicle Service >> Solenoids and Wiring Harness Replacement

Solenoids and Wiring Harness Replacement

Removal Procedure





1. Remove the case side cover. Refer to Case Cover, A/T.
2. Use a small flat-bladed tool in order to remove the wiring harness from the solenoid valve(s) (315A, 315B, 322, 334 and/or 440), TFP manual valve position switch (395) and/or the temperature sensor (391).





3. Remove the wiring harness (224).
4. Remove the clips retaining the solenoid(s).





5. Remove the solenoid(s).





6. Remove the 2 - 3 shift solenoid (315B).





7. Inspect the wiring harness (224).

Installation Procedure





1. Install the 2 - 3 shift solenoid (315B).





2. Install the solenoid(s).
3. Install the retaining clips.





4. Install the wiring harness (224).





5. Install the wiring harness to the solenoid valve(s) (315A, 315B, 322, 334 and/or 440), TFP manual valve position switch (395) and/or the temperature sensor (391).
6. Install the case side cover. Refer to Case Cover, A/T.
pro multis · About Operation CHARM