Shift Interlock: Service and Repair

Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Disconnect Caution in Service Precautions.
2. Remove the lever handle assembly from the shifter.
3. Disassemble the console, as needed, in order to access the shift control assembly. Refer to Console Replacement in Instrument Panel, Gauges and Warning Indicators.
4. Remove the park lock cable from the shift control assembly.
5. Remove the shift control cable from the shift control assembly.
6. Disconnect the electrical connectors.
7. Remove the shift control assembly.
8. Remove the shift interlock solenoid assembly from the control assembly.

Installation Procedure
1. Install the shift interlock solenoid assembly.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the shift control assembly-to-floor console bracket.
^ Tighten the mounting nuts to 24 Nm (18 ft. lbs.).
3. Connect the electrical connectors.
4. Install the shift control cable.
5. Install the park lock cable.
6. Install the console. Refer to Console Replacement in Instrument Panel, Gauges and Warning Indicators.
7. Install the lever handle assembly.
8. Connect the negative battery cable.