Trunk / Liftgate Switch: Service and Repair

REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Remove the latch.
3. Remove the screw (5) for the rear compartment lid ajar/lid lamp switch.
4. Remove the lid ajar/lid lamp switch.

INSTALLATION PROCEDURE
1. Position the rear compartment lid ajar switch to the lid latch.
2. Install the screw (5) to the lid ajar/lid lamp switch.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Tighten
Tighten the rear compartment lid ajar switch screw to 5 N.m (44 lb in).

3. Install the latch.
4. Close the rear compartment lid.