LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1999 >> Regal V6-3.8L SC VIN 1 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Repair Instructions >> 65. Input Clutch Housing Ball Check Valve Disassemble

65. Input Clutch Housing Ball Check Valve Disassemble

Important: Perform this procedure only if the inspection or leak check procedure indicated a problem.





Use a 6.25 mm (1/4 inch) drift and mallet in order to remove the ball check valve assembly (633) from the input clutch housing.
scientia non olet · About LEMON Manuals