Auto Door Lock (ADL)

Program the ADL feature using the following 4 different lock and unlock modes:
^ ADL Mode 0 - No automatic door lock or unlock
^ ADL Model:
- All of the doors lock automatically when the transmission shifts out of PARK.
- No auto door auto unlock in Mode 1
^ ADL Mode 2:
- All doors lock automatically when the transmission shifts out of PARK.
- The driver door unlocks automatically when the transmission shifts into PARK.
^ ADL Mode 3:
- All doors lock automatically when the transmission shifts out of PARK.
- All doors unlock automatically when the transmission shifts into PARK.

Perform the following operations:
1. Turn ON the ignition.
2. Place the vehicle in PARK.
3. Close all of the doors.
4. Press and hold the door lock switch in the LOCK position.

While holding the door lock switch, press the LOCK button on the vehicle's transmitter. After the initial activation of the transmitter LOCK button, each additional activation will increment the ADL mode 1, starting from the current ADL mode.

If cycled beyond ADL Mode 3, the RFA module will enter Mode 0. During this customization procedure, the Automatic Door Lock and Unlock will provide the customer with feedback of the current ADL mode. When the door lock switch is released, the RFA module will remain in the recent ADL mode. Since Mode 0 has no ADL functions, no feedback occurs.

If ignition voltage is lost or if any door is opened while in the customization procedure, the following actions will occur:
^ The ADL procedure will terminate.
^ The RFA module will remain in the most recent mode.