Memory Recall

When the DRIVER-1 or DRIVER-2 button is pressed the memory seat/mirror module receives the input and a single chime is sounded. The memory seat/mirror module supplies battery positive voltage (B+) to the seat motors. This is done until all of the seat position sensor feedback voltages equal the feedback voltages stored in the memory for the appropriate driver.

Battery positive voltage (B+) is supplied simultaneous to the memory seat/mirror module memory 1 and memory 2 inputs when one of the following actions occurs:
^ The DRIVER-1 and DRIVER-2 buttons are pressed simultaneously
^ The EXIT button is pressed

This action signals the easy exit function. In response the memory seat/mirror module will move the seat to the fully down and back position. The module supplies battery positive voltage (B+) to the LH seat front vertical, LH seat rear vertical, and the LH seat horizontal motors. The voltage is supplied until the seat is fully back and down. The recline motor is not moved during this operation.

Memory recall and easy exit functions may only be performed if one of the following situations exists:
^ The ignition switch is in the OFF position.
^ The gear selector is in the PARK position.