85. Exhaust Crossover Installation

1. Install the exhaust crossover.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the exhaust crossover studs to the right exhaust manifold.
^ Tighten the studs to 18 Nm (13 ft. lbs.).
3. Install the exhaust crossover bolts to the left exhaust manifold.
^ Tighten the bolts to 18 Nm (13 ft. lbs.).





4. Install the power brake booster heat shield.
5. Install the power brake booster heat shield nuts.
^ Tighten the power brake booster heat shield nuts to 20 Nm (15 ft. lbs.).