Installation Procedure

Description:

Installation Procedure
1. Route the pigtail through the front end sheet metal and attach all of the pigtail clips.
2. Install the Inflatable Restraint Front End Discriminating Sensor (2).

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the Inflatable Restraint Front End Discriminating Sensor mounting fasteners (3).

Tighten
Tighten the fastener to 11 N.m (94 lb in).

4. Connect the Inflatable Restraint Front End Discriminating Sensor harness connector (1) to the pigtail connector.
5. Install the Connector Position Assurance (CPA) (2) to the Inflatable Restraint Front End Discriminating Sensor harness connector (1).
6. Enable the SIR system.