Removal Procedure

Removal Procedure
1. Remove the two screws from the shoulder belt guide
2. Remove the shoulder belt guide from the seat.
3. Remove the screw and the escutcheon from the rear quarter panel trim.
4. Remove the rear seat cushion.
5. Remove the lap belt nuts and rear seat back.
6. Remove the quarter trim panel.
7. Disconnect the electrical connector at the shoulder retractor.
8. Remove the retractor anchor bolt.
9. Remove the bolt and the intermediate guide.
10. Remove the top anchor bolt and the guide loop.
11. Remove the lap retractor trim cover and the screw.
12. Remove the lap retractor anchor bolt.
13. Remove the retractor and belt assembly.