Camshaft Position Sensor: Service and Repair

REMOVAL PROCEDURE





CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Disconnect the electrical connector (2) from the camshaft position sensor (1).

Camshaft Position (CMP) Sensor:

3. Remove the camshaft position sensor bolt.
4. Remove the camshaft position sensor from the engine front cover.

INSTALLATION PROCEDURE

Camshaft Position (CMP) Sensor:

1. Install the camshaft position sensor to the engine front cover.
2. Install the camshaft position sensor retaining bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolt to 10 N.m (88 lb in).




3. Connect the camshaft position sensor electrical connector (2) to the (1) camshaft position sensor.
4. Connect the negative battery cable.