Rear Wheel Alignment

Important: Make left and right rear toe adjustments separately, per wheel, using the following procedure.

1. Loosen the inner adjustment link cam nut.





2. In order to adjust the toe, rotate the cam bolt (1) using an 8 mm socket on the threaded end of the bolt. Refer to Fastener Tightening Specifications.
Tighten the cam nut to 75 Nm (55 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

3. Tighten the tie rod nut.
Tighten the tie rod nut to 64 Nm (47 ft. lbs.).
4. Recheck the toe setting after tightening.
5. Readjust the toe setting if necessary.