Wiper Arm Blade Replacement

REMOVAL PROCEDURE




1. Turn the ignition switch to the ACCY position.
2. Set the wiper switch to the PULSE position.
3. Turn the ignition off when the wipers are at the bottom of the innerwipe position and not moving.
4. Remove the wiper blade from the wiper arm by pushing down on the latch and pulling the wiper blade from the wiper arm.

INSTALLATION PROCEDURE





IMPORTANT: Use only 22-inch beam type blades.

1. Install the wiper blade onto the wiper arm.
2. Operate the wipers and check for proper operation.