Operation CHARM: Car repair manuals for everyone.

C1278










Circuit Description
The PCM monitors various parameters and will not allow traction control operation if any parameter falls below a specified value.

Conditions for Running the DTC
The ignition is ON.

Conditions for Setting the DTC
The PCM detects a malfunction and then causes TCS shut down until the malfunction has been corrected.

Action Taken When the DTC Sets
^ A DTC C1278 is stored (This is a temporary malfunction)
^ The TCS is disabled
^ The TRACTION OFF indicator is turned on

Conditions for Clearing the DTC
^ The condition for the DTC is no longer present and the scan tool clear DTC function is used
^ 100 ignition cycles have passed with no DTCs detected

Diagnostic Aids
This code is for information only. As an aid to the technician, this code indicates that there are no problems in the ABS/ETS/TCS system. Any further references for diagnostic information should be taken from Engine Controls.