Front Door Striker: Service and Repair

Front Side Door Lock Striker Replacement

Removal Procedure

Each lock striker is a dual-pin type that attaches to an anchor plate in the body lock pillar. The door is held in the closed position when the lock snaps over and engages the striker.




1. Mark the position of the striker.
2. Remove the screws.
3. Remove the door lock striker.
4. Remove the spacers as equipped.
5. Remove the washer.

Installation Procedure

1. Install the washer.
2. Install any spacers that were removed.
3. Install the striker to the location marked.





Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the door lock striker screws.

Tighten the door lock striker screws to 25 Nm (18 lb ft).

5. Inspect the striker-to-lock engagement. If the adjustment is needed refer to door Lock Striker Adjustment (With Mini Wedge) (Door Lock Striker Adjustment (With Mini Wedge))Door Lock Striker Adjustment (W/O Mini Wedge) (Door Lock Striker Adjustment (W/O Mini Wedge)).