Operation CHARM: Car repair manuals for everyone.

Console Lamp Replacement (Bulb)


REMOVAL PROCEDURE
1. Remove the front floor console and reposition the console slightly rearward.
2. Grasp the console compartment lamp housing on top of the console compartment, press the housing toward one side and lift the released side.
3. Slide the lamp housing toward the opposite side to release the remaining tab and lift the housing away from the console compartment.
4. Rotate the lamp socket counterclockwise to release from the housing.
5. Remove the bulb from the socket.

INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Install the lamp socket to the lamp housing, then rotate clockwise to secure.
3. Insert one side tab of the lamp housing into position on the top of the console compartment.
4. Press the lamp housing toward the installed side and lower the opposite side into position, then release.
Check to be sure that the lamp is secure.
5. Position and install the front floor console.