Heater Pipe Replacement
REMOVAL PROCEDURETOOLS REQUIRED
J 38185 Hose Clamp Pliers
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the air cleaner and duct assembly.
3. Disconnect the inlet hose (3) from the inlet pipe.
4. Use J 38185 in order to position aside the heater hose inlet clamp.
5. Remove the inlet pipe mounting nut.
6. Remove the inlet pipe.
INSTALLATION PROCEDURE
1. Install the inlet pipe.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the inlet pipe mounting nut.
Tighten
Tighten the heater inlet pipe nut to 7 N.m (62 lb in).
3. Connect the inlet hose (3) to the inlet pipe.
4. Use J 38785 in order to position the heater hose inlet clamp.
5. Install the air cleaner and duct assembly.
6. Refill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.