Accelerator Controls Cable Bracket Replacement

REMOVAL PROCEDURE




1. Turn OFF the ignition.
2. Disconnect the accelerator cable cross slug from throttle body slot.
3. Depress the tangs and remove the accelerator cable from accelerator cable bracket.




4. If applicable disconnect the cruise control cable from the throttle lever and accelerator bracket.




5. Remove the nuts and bolts holding the accelerator cable bracket to the throttle body.
6. Remove the accelerator cable bracket.

INSTALLATION PROCEDURE




1. Install the accelerator cable bracket to throttle body.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nuts and bolts.

Tighten
^ Tighten the nuts to 10 N.m (89 lb in).
^ Tighten the bolts to 13 N.m (115 lb in).




3. Connect the accelerator cable into accelerator cable bracket.




4. Connect the accelerator cable cross slug into throttle body slots.
5. If applicable connect the cruise control cable to the throttle lever and accelerator cable bracket.