Operation CHARM: Car repair manuals for everyone.

A/C Refrigerant Pressure Sensor Replacement

A/C REFRIGERANT PRESSURE SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the air cleaner and duct assembly.
2. Disconnect the battery negative cable.
3. Disconnect the electrical connector from the A/C refrigerant pressure sensor.
4. Remove the A/C refrigerant pressure sensor from the liquid line.

INSTALLATION PROCEDURE




1. Lubricate a new O-ring seal with mineral base 525 viscosity refrigerant oil.
2. Install the new O-ring seal.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the A/C refrigerant pressure sensor to the liquid line.

Tighten
Tighten the A/C refrigerant pressure sensor to 4.7 N.m (41 lb in).

4. Connect the electrical connector to the A/C refrigerant pressure sensor
5. Connect the battery negative cable.
6. Install the air cleaner and duct assembly.