Shift Control Replacement

Removal Procedure





1. Remove the front floor console.
2. Remove the console wiring harness.





3. Remove the console shift control wiring harness.
4. Remove the range selector cable for the Automatic Transaxle (A/T). Refer to Automatic Transmission Range Selector Cable Replacement (A/T PNP Switch) or Automatic Transmission Range Selector Cable Replacement (A/T Console Shift Control) or Automatic Transmission Range Selector Cable Replacement (A/T Column Shift Control) or Automatic Transmission Range Selector Cable Replacement (New Cable Installation).
5. Remove the park/lock cable. Refer to Park Lock Cable Replacement.





6. Remove the console shift control nuts.
7. Remove the console shift control.

Installation Procedure





1. Install the console shift control.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the console shift control nuts.
Tighten
Tighten the console shift control nuts to 24 Nm (18 ft. lbs.).
3. Install the park/lock cable. Refer to Park Lock Cable Replacement.
4. Install the A/T range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement (A/T PNP Switch) or Automatic Transmission Range Selector Cable Replacement (A/T Console Shift Control) or Automatic Transmission Range Selector Cable Replacement (A/T Column Shift Control) or Automatic Transmission Range Selector Cable Replacement (New Cable Installation).





5. Install the console shift control wiring harness.





6. Install the console wiring harness.
7. Install the front floor console.