Reveal Molding Replacement - Front Door Window

Front Side Door Window Reveal Molding Replacement

Removal Procedure

1. Remove the outside mirror from door. Refer to Power Mirror Replacement (Power Mirror Replacement).
2. Loosen the reveal molding at the top of the window.




3. Pull the front door reveal molding from the door using a small flat-bladed tool to release the retaining clips while pulling.
4. Remove the reveal molding from the door.

Installation Procedure




1. Ensure the plastic clip retainers are not damaged prior to reinstallation of the reveal molding. Replace any broken clips.
2. Position the upper reveal molding to the door.
3. Starting at the front end, press down until the plastic retaining clips are fully seated.
4. Install the outside mirror to the door. Refer to Power Mirror Replacement (Power Mirror Replacement).