Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE




1. Relieve the fuel system fuel pressure. Refer to Fuel Pressure Release.
2. Remove the rear compartment trim panel (1).
3. Remove the bolts from the fuel sender access panel (2).




4. Remove the electrical connector from the fuel tank pressure sensor.




5. Remove the fuel tank pressure sensor from the fuel sender.

INSTALLATION PROCEDURE




1. Install the new fuel tank vapor pressure sensor into the fuel sender.




2. Install the electrical connector to fuel lank pressure sensor.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the fuel sender access panel (2) bolts.

Tighten
Tighten the bolts to 2 Nm (18 lb in).

4. Install the rear compartment trim panel.
5. Install the fuel tank filler pipe cap.
6. Install the negative battery cable.
7. Install the rear seat cushion.