Front Door Switch Replacement

Front Door Switch Replacement

Removal Procedure




1. Insert a flat bladed tool under the front edge of the switch plate (2).
2. Gently pry upwards in order to release the front edge of the switch plate (2) from the door trim panel (1).
3. Slide the switch plate forward in order to release the rear retainer tabs.
4. Disconnect the electrical connectors.




5. Remove the switchpack (2) from the switch plate (1) by releasing the retainer tabs with a small flat bladed tool.

Installation Procedure




1. Snap the switchpack into the switch plate.




2. Connect the electrical connectors.
3. Install the rear end of the switch plate into the door trim panel.
4. Press down on the front of the switch plate in order to engage the retainer clip.