Electronic Column Lock Module - Disassemble

Disassembly Procedure





1. Remove the coded key controller and ignition and key alarm switch assembly. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle.
2. Remove the upper tilt head components only. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle.
3. The lock cylinder should be in the off-lock position.
4. Insert a small screwdriver into the slot on the lock module assembly and push against the locking tab to remove.
5. Disconnect the park lock cable assembly (1).





6. Remove 3 pan head tapping screws (2) from the lock module assembly (1).
7. Remove the lock module assembly (1).