Door Window Weatherstrip

Front Side Door Window Weatherstrip Replacement

Removal Procedure

1. Remove the door trim panel.
2. Remove the door module.
3. Remove the water deflector.
4. Remove the window inner belt sealing strip.
5. Remove the outside rearview mirror.
6. Remove the window outer belt sealing strip.




7. Remove the window.
8. Remove the fasteners from the front window channel (2).
9. Carefully pull the window weatherstrip (1) and channel (2) from the door.

Installation Procedure






Important: When reusing the window weatherstrip, the flange mounting area (1) must be pinched together in order to counteract the splaying effect when removed. Use a thumb and an index finger in order to pinch the carrier (2) back together. Work from one end of the weatherstrip to the other.

1. Prep the weatherstrip for installation.




2. Install the window weatherstrip (1) to the door starting in the top corner working out in both directions.
3. Firmly seat the window weatherstrip to the door.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the window channel fasteners.

Tighten the window channel fasteners to 9 N.m (80 lb in).

5. Install the door window.
6. Install the outside rearview mirror.
7. Install the window outer belt sealing strip.
8. Install the window inner belt sealing strip.
9. Install the water deflector.
10. Install the door module.
11. Install the door trim panel.