Cellular Antenna

REMOVAL PROCEDURE
Use a razor blade or putty knife in order to cut the double back tape material while lifting up on the external foot.

INSTALLATION PROCEDURE
1. Clean the following components with alcohol. Thoroughly dry the components using a lint free cloth:
- The external glass mounting area
- The external foot
2. Apply new double back tape.
3. Peel the backing paper from the exterior mounting.
4. Mount the foot in the center of glass approximately 1 inch below the dark edge shading on the glass.
5. Firmly press on all 4 corners in order to ensure proper bonding between the adhesive and the glass.