Hinge Bracket

REMOVAL PROCEDURE
1. Disconnect the electrical connection from the interface card at the hinge.
2. Remove the phone assembly from the side of the armrest.
3. Remove the hinge screws from the armrest cover securing the phone bracket.
4. If the interface is being serviced, remove the 2 screws securing the interface card to the phone bracket.

INSTALLATION PROCEDURE
1. Install the phone bracket to the armrest cover hinge screws.
2. Install the phone assembly to the side of the armrest.
3. Connect the phone electrical connection to the interface card.
4. Press PWR in order to verify the proper electrical connection.