Scan Tool Data Definitions - Drivers Door Module (DDM)

8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the DDM.

Battery Voltage: Scan tool displays: volts - Display indicates the battery voltage input, 0 - 30 volts is the operating range.

Calibration ID: Scan tool displays: number - Display indicates the 4 digit calibration ID of the DDM.

Drivers Dome/Buzzer Sw.: Scan tool displays: On/Off - Display indicates the state of the drivers door jamb switch. On indicates the door is open and Off indicates the door is closed.

LR Dome/Buzzer Switch: Scan tool displays: On/Off - Display indicates the state of the left rear door jamb switch. On indicates the door is open and Off indicates the door is closed.

Pass. Dome/Buzzer Sw.: Scan tool displays: On/Off - Display indicates the state of the right front door jamb switch. On indicates the door is open and Off indicates the door is closed.

PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the DDM.

RR Dome/Buzzer Switch: Scan tool displays: On/Off - Display indicates the state of the right rear door jamb switch. On indicates the door is open and Off indicates the door is closed.