Fuel Door Switch: Service and Repair

Fuel/Rear Compartment Release Switch Replacement




REMOVAL PROCEDURE
1. Insert a flat-bladed tool between the face plate of the trim plate and the lower IP (1). Pry out the face plate.
2. Disconnect the electrical connectors.
3. Remove the fuel door/rear compartment (valet) release switch (2) from the face plate.

INSTALLATION PROCEDURE
1. Install the fuel door/rear compartment (valet) release switch (2) to the face plate.
2. Connect the electrical connectors.
3. Push the face plate into the lower IP in order to engage the retainers.