Scan Tool Data Definitions

8 DIGIT GM PART NUMBER- The scan tool displays an 8 digit alphanumeric number. The part number of the module.

BATTERY VOLTAGE- The scan tool displays Volts. The status of the battery voltage.

CALIBRATION ID- The scan tool displays 0-9999. The number designating what calibrations the module contains.

COMMANDED GENERATOR- The scan tool displays Off until the key is placed into the CRANK position then it displays On.

COMMANDED STARTER- The scan tool displays Disabled until the key is placed into the CRANK position then it reads Enabled.

COMPONENT SERIAL # 8-11- The scan tool displays 0-999. The internal serial code of the module.

COMPONENT SERIAL # 13-1- The scan tool displays 0-999. The internal serial code of the module.

COMPONENT SERIAL # 17-1- The scan tool displays 0-999. The internal serial code of the module.

GENERATOR PWR- The scan tool displays a percentage. The percent of time the generator is producing power.

IGNITION 0- The scan tool displays Volts. The voltage of ignition 0 circuit at the module.

IGNITION 1- The scan tool displays Volts. The voltage of ignition 1 circuit at the module.

IGNITION 3- The scan tool displays Volts. The voltage of ignition 3 circuit at the module.

IGNITION VOLTAGE- The scan tool displays Volts. The status of the ignition voltage.

Jullian DATE OF BUILD- The scan tool displays 0-999. The month and year that the module was built.

PROM ID- The scan tool displays 0-9999. The identification number of the module internal PROM.

VOLTAGE LAMP- The scan tool displays On when the IPC receives a signal from the PCM to turn the lamp On.

YEAR MODULE BUILT- The scan tool displays a 1990-2020. The production year the module was manufactured.