Tilt Spring - Assemble

Assembly Procedure





1. Install the spring guide to the tilt spring. Lubricate spring guide with synthetic grease.

Caution: The tilt spring and the spring guide are under pressure. The tilt spring and the spring guide may become a projectile. Secure the spring with locking pliers during removal. Secure the spring with locking pliers during installation. Bodily injury may result during removal and installation of the tilt spring and the spring guide. Always use caution during removal and installation of the tiff spring and the spring guide.





2. Secure the tilt spring (1).
3. Install the tilt spring (1) to the post on the steering column support assembly (2).
4. Install the upper and lower shrouds. Refer to Steering Column Trim Covers - Assemble - Off Vehicle.