Turn Signal & Multifunction Switch - Disassemble

Disassembly Procedure
1. Remove the upper and lower shrouds. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle.





2. Remove three wire harness straps (3) from the wire harness assembly (4).
3. Remove one wire harness strap (2) from the upper tilt head assembly (1).
4. Pop the wire harness assembly (4) out of the wire harness strap (5).





5. Remove two pan head tapping screws from the turn signal and multifunction switch assembly.
Remove the turn signal and multifunction switch assembly.