B1983

Diagnostic Chart:

SCHEMATICS
Refer to Control Module References in Body Controls for proper schematics.

CIRCUIT DESCRIPTION
The module has an internal voltage sensor that checks the input voltage to determine if it is between 9.0-15.5 V.

CONDITIONS FOR SETTING THE DTC
The DTC B1982 sets when the battery voltage raises above below 16.0 volts.

ACTION TAKEN WHEN THE DTC SETS
Stores a DTC B2348 in the BCM memory

CONDITIONS FOR CLEARING THE DTC
In order to clear the DTC from a current status the voltage shall be less than 15.5 volts for 1.2 seconds.

TEST DESCRIPTION
The numbers below refer to the step numbers on the diagnostic table.
3. Tests for the proper operation of the complete circuit.
4. Tests for the proper operation of the B+ input circuit.