Coil Cord Retainer

REMOVAL PROCEDURE
1. Remove the console door inner panel.
2. Remove the screw securing the retainer.
3. Remove the retainer.

INSTALLATION PROCEDURE
1. Install the screw to the retainer.
2. Install the inner panel to the console door.
3. Install the hook coil cord around the retainer.
4. Close the lid.

REMOVAL PROCEDURE
60/40 Armrest
1. Open the armrest lid.
2. Disconnect the electrical connection from the interface card at the hinge.
3. Lift the hang up cup from the armrest.
4. Remove the screws securing the hang up cup to the storage tray bracket.

INSTALLATION PROCEDURE
1. Install the screws securing the hang up cup to the storage bracket.
2. Install the hang up cup assembly on the armrest.
3. Connect the electrical connection at the interface card.
4. Close the armrest lid.