Front Seat Adjuster Replacement

Front Seat Adjuster Replacement

Removal Procedure

Caution: Refer to SIR Caution.
1. Remove the front seat. Refer to Seat Replacement (Seat Replacement) .
2. Remove the seat cushion. Refer to Front Seat Cushion Replacement (Seat Cushion Replacement - Front) .




3. Remove the bolt retaining the seat belt retractor to the adjuster.




4. Release the J-hook retainers at the bottom of the seat back trim (19).
5. Roll the seat back trim cover up enough to access the seat back frame retaining bolts (16,17).
6. Disconnect electrical wiring to the seat back.
7. Remove the retaining bolts (16,17).
8. Remove the seat back.




9. Remove the nut retaining the seat belt buckle to the adjuster.




10. Remove the horizontal actuator (4). Refer to Seat Adjuster Horizontal Actuator Replacement (Seat Adjuster Horizontal Actuator Replacement) .



Installation Procedure





1. Install the horizontal actuator (4). Refer to Seat Adjuster Horizontal Actuator Replacement (Seat Adjuster Horizontal Actuator Replacement) .




2. Install the seat belt buckle to the adjuster. Refer to Seat Belt Buckle Replacement - Left Front or Seat Belt Buckle Replacement - Right Front.




3. Release the J-hook retainers at the bottom of the seat back trim (19).
4. Position the seat back to the adjuster.

Notice: Refer to Fastener Notice.

5. Install the bolts (16,17).

Tighten the bolts (16,17) to 26 N.m (19 lb ft).

6. Connect the electrical wiring from the seat back.
7. Connect the seat back cover J-hook retainers.




8. Install the seat belt retractor to the adjuster.
9. Install the seat belt retractor bolt.

Tighten the seat belt retractor bolt to 24 N.m (18 lb ft).

10. Install the seat cushion. Refer to Front Seat Cushion Replacement (Seat Cushion Replacement - Front) .
11. Install the front seat. Refer to Seat Replacement (Seat Replacement) .
12. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration. Service and Repair