2. Crankshaft Balancer Removal

^ Tools Required
- J37096 Flywheel Holding Tool
- J38197 Crankshaft Balancer Puller





1. Use J37096 in order to hold the flywheel.





2. Remove the crankshaft balancer bolt.





3. Use the J38197 in order to remove the crankshaft balancer.

Important: Do not separate the crankshaft pulley from the crankshaft balancer. Service the crankshaft pulley and the crankshaft balancer as an assembly.

3.1. Invert J38197-2 so the leg of the tool is facing away from the crankshaft balancer.
3.2. Install the silver screws J38197-4 to the crankshaft balancer.
3.3. Turn J38197-1 to remove the crankshaft balancer from the crankshaft.
3.4. Remove J38197-1, J38197-2, and J38197-4 from the crankshaft balancer.