90. Water Pump Installation

^ Tools Required
- J36660-A Torque Angle Meter
1. Install the water pump gasket.





2. Install the water pump.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the water pump bolts.
^ Tighten the water pump bolts to 15 Nm (11 ft. lbs.).
^ Use id 36660-A to tighten the bolt an additional 80 degrees.





4. Install the water pump pulley.
5. Install the water pump pulley bolts.
^ Tighten the water pump pulley bolts to 13 Nm (116 inch lbs.).