Instrument Panel Cluster (IPC) - Replacement

Instrument Cluster Replacement

Removal Procedure

1. Remove the IP cluster trim plate . Refer to Instrument Panel Trim Panel Replacement - Left Side (Instrument Panel (IP) - Trim Panel Replacement - Left) .
2. Place a protective cloth on the steering column to protect the column from scratches.




3. Remove the cluster fasteners (2).
4. Remove the instrument cluster (1).




5. Disconnect the electrical connector (1) from the cluster.



Installation Procedure





1. Connect the instrument cluster electrical connector (1).




2. Install the instrument cluster (1).

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the fasteners (2).

Tighten the fasteners to 1.5 N.m (14 lb in).

4. Install the IP cluster trim plate. Refer to Instrument Panel Trim Panel Replacement - Left Side (Instrument Panel (IP) - Trim Panel Replacement - Left) .