Outlet
REMOVAL PROCEDURETOOLS REQUIRED
J 38185 Spring Hose Clamp Pliers
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
2. Remove the heater hose from the heater outlet pipe adapter using the J 38185.
3. Remove the bolt from the heater pipe adapter (2).
4. Remove the heater outlet pipe adapter (2) from the engine.
INSTALLATION PROCEDURE
1. Install the heater outlet pipe adapter (2) to the engine.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the heater pipe adapter bolt.
Tighten
Tighten the bolt to 10 N.m (89 lb in).
3. Install the heater hose to the heater pipe adapter and reposition the clamp using the J 38185.
4. Fill the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.