SIR Side Impact Module Wiring Harness Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Inflator Module Handling And Storage Caution in Cautions and Notices.

1. Disable the SIR system. Refer to Disabling the SIR System.
2. Removal of passenger or driver inflatable restraint side impact inflator module wiring harness use the same procedure.
3. Remove the inflatable restraint side impact inflator module (2) from seat (1).
4. With seat back panel remove the inflatable restraint side impact inflator module wiring harness (3) will be expose.
5. Remove the retaining clips that fastens side inflator module wiring harness (3) to seat (1).

INSTALLATION PROCEDURE
1. Install new side inflator module wiring harness (3) to seat (1).
2. Install retaining clips that fastens side inflator module wiring harness (3) to seat (1).
3. Install the inflatable restraint side impact inflator module (2) to seat (1).
4. Enable the SIR system. Refer to Enabling the SIR System.