Cigar Lighters (With DO7 or WO1)

Battery positive voltage (B+) is applied at all times through the rear fuse block AUXOTLT fuse to the cigar lighter and the rear cigar lighter on CKT 2340. When the cigar lighter is pressed in, the cigar lighter heating element is provided a ground path through CKT 450 to ground G201 and heats up. When the heating element reaches a predetermined value, the cigar lighter will pop out, thus interrupting the circuit.

For a description of the RPO Code(s) shown in this article refer to the RPO Code List found at Vehicle/Application ID RPO Codes