Operation CHARM: Car repair manuals for everyone.

Brake Rotor/Disc

NOTE: The content of this article/image reflects the changes called out by TSB: 05-05-23-004.
Front Brakes:
Important: All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the maximum or minimum thickness after refinish specifications.
Rotor Discard Thickness (see note) 1.21
Minimum Rotor Thickness 1.22
Rotor Thickness (new) 1.27
Maximum Lateral Runout 0.003
Maximum Scoring 0.059 in
Thickness Variation 0.0005
Rear Brakes:
Important: All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the maximum or minimum thickness after refinish specifications.
Discard Thickness (see note) 0.35
Minimum Wear Thickness 0.39
Rotor Thickness (new) 0.43