Transmission Pressure Test Port: Service and Repair

Removal Procedure





1. Remove the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
2. Remove the line the pressure pipe plug (38).

Installation Procedure





1. Apply GM P/N 8654382 to the line pressure pipe plug.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the line pressure pipe plug (38).
Tighten
Tighten the line pressure pipe plug to 11 Nm (97 inch lbs.).
3. Install the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.