Fascia Grille Replacement (Regal)

Fascia Grille Replacement (Regal)

Removal Procedure




1. Open the hood.
2. Remove the nuts from the locating studs.
3. Remove the grille from the front bumper fascia.

Installation Procedure




1. Align the grille locating studs to the holes in the front bumper fascia.
2. Press into place until fully seated.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the grille nuts to the studs.

Tighten the nuts to 5 Nm (44 lb in).

4. Close the hood.